| |
 |
Our Products Range |
|
|
| |
 |
| |
 |
This Authentic Humidity Chamber are also used : For climate & durable tests for electrical & electronics apparatus or components.For stability test in Pharmaceutical Industries, cement industries Construction:Double walled inner chamber made of 18 guage Stainless steel & outer chamber of mild steel duly painted.Insulated properly by glass wool.Provided with full-length inner glass door & outer double walled door with magnetic gasket & lock.Perforated removable trays made of Aluminium / Stainless steel are provided adjustable channel.The whole unit rests on Sturdy Castors Wheels. Heating & cooling:- For heating, durable strip Heaters are provided to achieve heating above ambient temperature. |
|
|
A boiler is provided for uniform HUMIDITY KIRLOSKAR COOLING UNIT ARE USED FOR DESIRED TEMP UP TO (-20OC) A SEPARATE DE-HUMIDIFIER ARE UDSED FOR LOWER HUMIDITY, Microprocessor based Temperature & Humidity controller directly controls the Temperature & Humidity. Temperature and Humidity are sensed by a Electronic sensor & directly displayed in the accuracy of Temp ? 0.5 0C & Humidity 2% RH. Temperature ranges (-200C to 60 0C. Humidity 10% to 97% RH. PICO TECH MAKE UK, THE Temperature & Humidity CONVERTER ARE USED FOR COMPUTER INTERFACING.HEATING RAMP RATE ARE ADJUSTABLE BY IMPORTED MAXTHERMO MAKE MICROPROCCESSOR BASED PID TEMPERATURE CONTROLLER. |
| OPTIONAL:- |
• Electronic port for recording Temperature, Humidity Date & Time on Printer.
• COMPUTER SOFTWARE & HARDWARE– PICO LOG UK FOR COMPLETE PROGRAMING & PRINTING.ITS MAKE COPMLETE CMPUTERIDSED,ANY CYCLES CAN MAINTAINED.
• 4 K. bytes memory to store the observations as per customer’s application.
• Computer operated unit RS. 232 port & multiple unit operation on PC by RS. 485 is available. |
| |
| SIZE:- |
| |
| Cat No. : |
Capacity |
Internal dimension
WxDxH CM |
Temp |
Humidity / Range |
| AUT-01 |
170 liters |
50x43x83 |
Temp (-20 0C ) to 60 0C |
10 to 95% RH. |
| AUT-02 |
285 liters |
58x51x97 |
Temp (-20 0C ) to 60 0C |
10 to 95% RH. |
| AUT-03 |
350 litre |
70x70x70 |
Temp (-20 0C ) to 60 0C |
10 to 97% RH. |
| |
Supply 230 volts, 50 Hz. 25 amps |
|
|
| |
 |
The opacity of plastic material in sheet or pipe form is defined as the amount of light passing through a test specimen taken from the material under test as a percentage of the total incident light. It is determined by measuring the amount of light falling on a photocell in path of light rays both with and without the test specimen being placed in the path of rays.
The “Authentic” opacity tester consists of a light source giving a constant luminous output from an electric lamp operating from a stabilized DC voltage source, a mini integrating photometer for collecting the light entering it through a small opening in its wall, and a photocell with amplifier for measuring the intensity of light entering the photometer.
The light source has a stabilized DC voltage supply, a low voltage tungsten filament lamp, and a optical collimator system having a set of lenses and a small circular opening. The light coming from this system passes through a circular opening in the integrating photometer. An adjustable width specimen holder is provided to hold a flat test specimen in front of the opening of the photometer.
An eye response corrected silicon photocell is used for measurement of light intensity. When a test specimen is inserted in the path of light rays a part of this light gets absorbed by it, thus effecting the photocell is fed to an amplifier, which gives a linear output. This output is read on a digital meter.
The apparatus is complete with a light proof cabinet for housing the light source and the photometer with the photocell. The DC voltage supply and the amplifier are also built in the same cabinet. The arrangement is such that external light can not enter the photometer either with or without the test specimen being held in the clamp. |
| SIGNIFICANCE:- |
This test shows the Transparancey
of product i.e.sheed. Wall thickness of different UPVC Pipes Paper .etc. |
| SPECIFICATIONS:-
Photo cell “LUTRON” South Korian.
Indication Digital.
Power 3 Amp. 220 Volts.
Size 300 X 300 X 40 mm.
Accuracy 0.01 %
Least count 0.01 %
Note:- Calibration Certificate are provided by us.
Authentic Instruments reserve the rights to make improvement to the equipments, without notice |
| |
 |
 |
