| |
 |
Our Products Range |
|
|
| |
 |
| |
 |
General:-Dispersion of additives (pigments&certain fillers)in plastics very much effects on the ultimate properties and life of the moulded component. This can be very well controlled by proper mixing of the addition in plastics as well as by removed of impurities in additives etc.. |
|
|
FEATURES:-
• Hot Plate.
• Energy regulated with indication lamp and on/off switch.
• Hot plate diameter: 8 inch, coated with enemal coating.
• Dimension – 100x200x300
Projection Microscope:
• Projectionscreendis:4inch.Magnification:200x4”
• Projection MODEL- 4” OR 6” Projection
• Light source: 12V Auto lamp/12V Helogen.
? Dimension – 160x100x400 mm |
| |
 |
| |
 |
Spacer frame:- 120 x 100 x 4 mm. Pressure :- 100 kg/cm2 Temp. :- 180º C...
SPECIFICATION:-
Spacer frame: 120 x 100 x 4 mm. Heater: Cartridge Type Heater. Controller : Microprocessor Based controller.
Hydraulic Press: 20 Ton cap.
Pressure guage: 0 to 700 kg/cm2
|
|
| |
 |
| |
 |
GENERAL:-The “AUTHENTIC” Carbon Black Content Tester has been designed incorporating many features and new ideas. The apparatus conforms to the most generally recognized National & International standers including BIS, IS, ASTM etc.The Method depends on the fact that non-polar olifent polymers, when heated in an inert atmospheres (e.g. oxygen free nitrogen).
|
|
| |
|
|
| |
 |
GENERAL:-The “AUTHENTIC” Carbon Black Content Tester has been designed incorporating many features and new ideas. The apparatus conforms to the most generally recognized National & International standers including BIS, IS, ASTM etc.The Method depends on the fact that non-polar olifent polymers, when heated in an inert atmospheres (e.g. oxygen free nitrogen). |
|
| |
Undergo a yrolyticdepolymerisatio, breaking down into smaller molecutes which can be effectively distilled off at the pyrolytic temp. Any non-volatile components –for instance Carbon Black –will be left in the furnace and it has been demonstrated that they may be recoveredquantitatively by this method. |
| SPECIFICATIONS:-
Dimensions : 400 W X 300 D X 500 H (mm)
Electrical : Power Load 2.0 Kw Capacity. Supply 220 V AC 50 Hz, Single PhaseTemp. Range 0 to 1200° C Accuracy ± 1 Deg. C Temp. Controller Japanease PID. “Maxthermo” Approx. Weight: 30 Kgs |
| |
 |
 |
